Table of Contents
Related FAQs
FAQ Categories
The ID measures non-flat parts
The ID method has been tested on non-flat samples such as PET bottles- once cut different areas of the bottles can be measured easily without the need deform or bend them during measurement.
Measurements of non-flat parts is not possible using the traditional haze method.
Related products
Novo-Haze TX Transmission Hazemeter
- Quantify optical quality of transparent materials such as plastic films.
- Measure haze and total transmission according to ASTM D1003 (CIE C).
- Rhopoint ID Imaging Transmission Appearance Meter - Characterise the transparency of a material in a single measurement
Rhopoint ID Imaging Transmission Appearance Meter
- Characterise the transparency of a material in a single measurement
- Measures small sample sizes that cannot be measured with a traditional haze meter
- Haze measurement correlated with existing standards (ASTM D1003)
- Research article from Macromolecular Materials & Engineering
Rhopoint ID In-line Transparent Appearance Analysis
- Camera-based system
- Quantify product transparency with parameters that are highly correlated to human perception
- Short or long focal distance versions available to suit customer production line
