+44(0)1424 739 622

MiB_Logo_Panel_Colour

How do I know when my calibration tile needs replacing?

The calibration tile will need replacing if the read area on the tile is damaged.

Image of the Rhopoint IQ showing the read area, indicated by the markings
Read area is indicated by markings on the instrument

If in any doubt, please contact our service department who will be able to assist you in determining if a replacement is required.

Related products

Flow cup afnor

AFNOR Viscosity Flow Cup

  • 2mm - 8mm orifice diameter
  • 15 โ€“ 3000 cSt viscosity range
  • 25 -150 sec flow times
  • Supplied with a certificate of conformity
  • Sheen 419/2.5, 419/4, 419/6 & 419/8 equivalent

Flow cup astm iso

ASTM D1200 Viscosity Flow Cup

  • 2.1mm - 5.8mm orifice diameter
  • 10 โ€“ 1200 cSt viscosity range
  • 30-100 sec flow times
  • Supplied with a certificate of conformity
  • Sheen 406/1, 406/2, 406/3, 406/4 & 406/5 equivalent

How do I know when my calibration tile needs replacing?