FAQs

Gloss, Haze, DOI & Opacity (49)

  1. How do I measure the visual appearance of high gloss, dark premium finishes?
  2. Choosing the correct range for gloss measurement
  3. Why should I use a custom adaptor?
  4. When do I use the curved part adaptor?
  5. Should I use the measuring head connected directly to the instrument?
  6. ISO2813 recommends surfaces measuring mid to low gloss finishes using 60 and 85 deg.
  7. When should I use a custom adaptor?
  8. How can I overcome errors in reading due to operator poor positioning?
  9. How do I calibrate my instrument when using a custom adaptor?
  10. How often should I recalibrate the IQ Flex?

Surface & Appearance Analysis (6)

  1. Surface Scratches FAQ
  2. What parameters affect Coefficient of Friction (COF) values?
  3. How can Coefficient of Friction (COF) values relate to packaging speeds?
  4. How is Coefficient of Friction measured (COF)?
  5. What is slip/friction?
  6. Who measures slip/friction?

Packaging Test Instruments (5)

  1. Interpreting Crease and Board Stiffness Rests
  2. Manual or Fully Automated Testing
  3. How is board stiffness and crease resistance measured?
  4. Why is board stiffness testing and crease resistance testing important?
  5. Who Measures Board Stiffness and Crease Resistance?

Minimum Film Forming Temperature Instrument (MFFT) (4)

  1. Is the MFFT suitable for measuring resins containing substances such as graphite?
  2. Do I need to Calibrate the MFFT?
  3. How can I check the MFFT is operating at the correct temperature?
  4. What is the MFFT?

Transparency Measurement (1)

  1. Why buy a Rhopoint ID instead of a haze meter or a haze clarity meter?

How Can We Help?

If you have a question, need more information, or would like to discuss your requirements, simply fill out this contact form and we’ll be in touch shortly.