Search by Standard

ASTM D1003
Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
ASTM D1200
Standard Test Method for Viscosity by Ford Viscosity Cup
ASTM 2354
Standard Test Method for Minimum Film Formation Temperature (MFFT) of Emulsion Vehicles
ASTM D2457
Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics
ASTM D2805
Standard Test Method for Hiding Power of Paints by Reflectometry
ASTM D4214
Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films
ASTM D523
Standard Test Method for Specular Gloss
ASTM D562
Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer
ASTM E1347
Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry
ASTM E430
Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry
BS3900
BS3900 - Determination of flow time by use of flow cups
DIN 53211
Paints, varnishes and similar coating materials. Determination of flow time using the DIN flow cup
DIN 67530
Reflectometers a means for gloss assessment of plane surfaces of paint coatings and plastics

 

ISO 2115 Plastics
Polymer dispersions -- Determination of white point temperature and minimum film-forming temperature
ISO 2431
Paints and varnishes — Determination of flow time by use of flow cups
ISO 2813
Determination of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees
ISO 2814
Paints and varnishes - Comparison of contrast ratio (hiding power) of paints of the same type and colour
ISO 2884-1
Paints and varnishes -- Determination of viscosity using rotary viscometers -- Part 1: Cone-and-plate viscometer operated at a high rate of shear
ISO 6504 Paints and varnishes
Determination of hiding power - Part 3: Determination of contrast ratio (opacity) of light-coloured paints at a fixed spreading rate
ISO 7668
Anodized aluminium and aluminium alloys - Measurement of specular reflectance and specular gloss at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees