이 페이지는 아직 한국어로 번역되지 않아 영어로 표시됩니다.
Calibrating Aesthetix in AE
Once a module is chosen, it may be required to calibrate the sensor.
Calibration Standards
The following standards must be used dependent on the module.
| Module | Standard |
|---|---|
| Gloss Module | B8000-011 Gloss Module Standard |
| Texture Module | B8000-012 Texture Module Standard |
| Coatings Physical Test | B8000-011 Gloss Module Standard |
Modules which do not require calibration include:
- Sparkle Module
Click on the calibration icon to begin calibration and follow the on-screen instructions. Calibrating an Instrument in AE
The instrument should be checked by measuring the calibration tile daily and comparing read values with the certified values. If values are out of tolerance, recalibrate the sensor.