Maintanance Menu

The maintenance menu contains information about the instrument and feedback from various sensors. It will help diagnose any issues with general operation.

Range

The current range selected in the instrument. Target temperatures are shown.

LOW, MID, HIGH

Readings from the temperature sensors mounted on the reverse of the test plate.

Water In, Water Out

Readings from the temperature sensors mounted on the water inlet and the coolant heatsink.

Slider Sensor

Temperature of the test plate at the location of the slider and the feedback from the sensor.

RUN/STOP

Will start and stop the instrument temperature regulation.

Info

Shows information about the instrument. Serial number, service date and hardware variant.

Logs

Exports logs from the instrument for diagnostic purpose. Note a USB must be connected to export the logs.