Rhopoint Instruments Manual
Esta página aún no está traducida y se muestra en inglés.

Texture Module Parameters

Index Name / Title Unit Description
60° 60° Gloss GU Conventional 60° gloss value of the textured area, indicating overall specular reflectance level.
Sa Rough Areal Surface Roughness p‑µm Average height variation over the measured area using unfiltered topographical data, expressed in perceived microns.
Ca Cell Amplitude p‑µm Average peak-to-valley height of the texture cells: the difference between the highest and lowest point within each cell, averaged over all cells.
Cn Cell Number – Total number of detected texture cells within the analysed area.
Cs Mean Cell Size mm² Mean area of the detected texture cells.
CsMin Minimum Cell Size mm² Area of the smallest detected cell within the measurement area.
CsMax Maximum Cell Size mm² Area of the largest detected cell within the measurement area.
CsDev Cell Size Standard Deviation – Standard deviation of the cell areas divided by the mean cell area (relative spread), indicating how uniform the texture features are.
Hs Hill Size mm² Mean hill area per cell; a “hill” is the part of a cell above the Feature Threshold level. Cells without a hill count as zero, so Hs reads lower when some cells have no hill.
F Fill Factor % Ratio of hill area to cell area, calculated for each cell and averaged over all cells.
R Reflectivity – Average reflectivity level of the textured surface region.
RC Reflective Contrast – Difference in reflectivity between texture features and surrounding areas.
RV Reflectivity in Valleys – Reflectivity associated with valley (low) regions of the texture.
RH Reflectivity on Hills – Reflectivity associated with hill (high) regions of the texture.
Fsep Feature Separation µm Records the user setting for the Feature Separation parameter.
Fsel Feature Selection % Records the user setting for Feature Selection parameter analysis.
FThld Feature Threshold -1 to +1 Records the user setting for Feature Threshold parameter analysis.
R (RGB) Red RGB Colour Intensity (0–255) Average red-channel surface colour within the textured area.
G (RGB) Green RGB Colour Intensity (0–255) Average green-channel surface colour within the textured area.
B (RGB) Blue RGB Colour Intensity (0–255) Average blue-channel surface colour within the textured area.

Topographical Graph Scale- Perceived Microns [pµm]