# Connecting TAMS via WIFI

> [!note] Bu sayfa henüz çevrilmedi ve İngilizce olarak gösteriliyor.


To set up wifi TAMS uses an AP mode connection to connect to a local network:

**MENU>Admin>Device Settings>Factory>Connectivity>Wifisetup**  
![image description](../_images/1773144435906-SC0REKUHCv.png)

1. Switch WIFI to **ON**
2. Click WIFI setup

The TAMS will initialise wifi and wait for a connection.

The green dot (1) indicates the wifi is initialised.

![image description](../_images/1773147693677-VjlCdgAuQK.png)

On your PC navigate to Wifi and network settings in windows 11.

![image description](../_images/1773144875310-id8qAi4JoW.png)

Show available networks then double click on TAMS_AP.  
When prompted enter the password **Tams1234**

in a browser navigate to the following website- [10.42.0.1](http://10.42.0.1/)

1. In the dropdown select the network you wish to connect to
2. Enter the wifi password for this network
3. Press connect

![image description](../_images/1773145555930-t7NDbVaw94.png)

Once connected the number of green circles (1) indicate the strength of the wifi signal 2- good, 1- OK, 0- poor  
![image description](../_images/1773148376985-8IejBn9PFX.png)