# Using the Job Mode

> [!note] Bu sayfa henüz çevrilmedi ve İngilizce olarak gösteriliyor.


Job Mode controls how TAMS organises measurements into named jobs or parts. It can be used simply to record a few readings, or to guide an operator through a predefined list of parts using a database.

#### Job Mode options

Job Mode has three settings:

- **OFF**
    
    - No job or part information is used.
    - TAMS records measurements and batches, but does not ask for batch names.
    - Best for quick checks and ad‑hoc measurements.
- **Manual**
    
    - The operator chooses job/part information when closing a batch.
    - TAMS can prompt for a **batch name** taken from a database (for example a list of parts).
    - Suitable when parts are measured in flexible order, but still need to be labelled.
- **Guided**
    
    - TAMS guides the operator through a predefined list of parts or positions.
    - Each batch is linked to a specific item in the database (for example “Panel A”, “Panel B”).
    - Best when a complete product must be measured in a specific sequence.

Set Job Mode in **Menu → My Car → Job mode** (names may vary slightly with firmware).