# Texture Module Parameters

> [!note] Bu sayfa henüz çevrilmedi ve İngilizce olarak gösteriliyor.


|Index|Name / Title|Unit|Description|
|---|---|---|---|
|60°|60° Gloss|GU|Conventional 60° gloss value of the textured area, indicating overall specular reflectance level.|
|Sa Rough|Areal Surface Roughness|p‑µm|Average height variation over the measured area using unfiltered topographical data, expressed in perceived microns.|
|Ca|Cell Amplitude|p‑µm|Average height of texture “cells” (features) relative to the local mean plane.|
|Cn|Cell Number|–|Total number of detected texture cells within the analysed area.|
|Cs|Mean Cell Size|p‑µm|Average lateral size of the detected texture cells.|
|CsMin|Minimum Cell Size|p‑µm|Smallest detected cell size within the measurement area.|
|CsMax|Maximum Cell Size|p‑µm|Largest detected cell size within the measurement area.|
|CsDev|Cell Size Standard Deviation|p‑µm|Variation (spread) of cell sizes, indicating how uniform the texture features are.|
|Hs|Hill Size|p‑µm|Typical size of raised “hill” features on the surface.|
|F|Fill Factor|–|Fraction of the area occupied by detected texture cells or hills.|
|R|Reflectivity|–|Average reflectivity level of the textured surface region.|
|RC|Reflective Contrast|–|Difference in reflectivity between texture features and surrounding areas.|
|RV|Reflectivity in Valleys|–|Reflectivity associated with valley (low) regions of the texture.|
|RH|Reflectivity on Hills|–|Reflectivity associated with hill (high) regions of the texture.|
|Fsep|Feature Separation|µm|Records the user setting for Feature Seperation parameter|
|Fsel|Feature Selecttion|%tage|Records the user setting for Feature Selection parameter analysis.|
|FThld|Feature Threshold|-1 to +1|Records the user setting for Feature Threshold parameter analysis.|
|R (RGB)|Red RGB Colour|Intensity (0–255)|Average red-channel surface colour within the textured area.|
|G (RGB)|Green RGB Colour|Intensity (0–255)|Average green-channel surface colour within the textured area.|
|B (RGB)|Blue RGB Colour|Intensity (0–255)|Average blue-channel surface colour within the textured area.|

Topographical Graph Scale- Perceived Microns [pµm]