# Adaptor Mount

> [!note] Deze pagina is nog niet in het Nederlands beschikbaar en wordt in het Engels weergegeven.


#aesthetix

The adaptor mount is designed to allow multiple mounting options for the Aesthetix, it attaches to the Aesthetix using the mounting holes on each end of the device. It is provided with the lab stand but can also be purchased separately.

**Part Number- B8000-300**
The adaptor mount has two options for mounting the device, direct mounting on the measurement stand or four mounting holes designed to take M6 socket cap screws.

Central hole is used in the lab stand, 4 remaining holes can be used for mounting using M6 screws.
![Adaptor Mount](../_images/1770909947836-adaptor-mount.png)

If using the lab stand attach the adaptor plate to the adaptor mount using the thumb screw.
![image description](../_images/1770909718302-PXL_20260212_122008289.jpg)

Attach the mount to the Aesthetix using the supplied 1/4 UNC screws.
![](../_images/1770909724276-PXL_20260212_122103244.jpg)  
![](../_images/1770909728970-PXL_20260212_122128346.jpg)

Adaptor mount fitted showing the lab stand adaptor plate.
![](../_images/1770909734449-PXL_20260212_122200744.jpg)