# Running Compatibility Checks

> [!note] このページはまだ翻訳されておらず、英語で表示されています。


The **Checks** tab is the heart of Symmetron. You select the Rhopoint product you intend to use, and Symmetron runs a set of read-only checks to confirm that this PC meets every technical requirement for that product.

## Select your product

When you open Symmetron, the Checks tab shows the product picker. Each tile represents a Rhopoint product or product combination.

<!-- docshot: checks crop=.product-section -->
![](../_images/symmetron-checks.png)

Click the tile that matches the product you plan to install. Symmetron immediately starts running the checks for that product.

The available products are:

1. Appearance Elements + Aesthetix
2. Appearance Elements + TAMS
3. Appearance Elements + Optimap
4. Elements Hub + Aesthetix
5. Elements Hub + AIDO
6. COM Agent
7. AI Lab
8. IDTX Lab
9. Quick Report App

> [!info] Each product runs a tailored set of checks. For example, an Appearance Elements + Aesthetix profile checks for the camera driver and the required USB 3 ports, while a network-only product checks different things.

## Read the results

As the checks run, results appear in the **Results** list below the picker. A summary bar at the top counts how many checks passed, raised a warning, failed, or returned information.

<!-- docshot: example-checks crop=.results-section -->
![](../_images/symmetron-example-checks.png)

Each result row shows:

1. A status icon — pass, warning, fail, or information.
2. The name of the check (for example *Operating system*, *USB 3 controller*, *Camera driver*).
3. A short explanation, and details such as the value that was found.

The results are sorted so that the most important findings — failures and warnings — appear at the top.

| Status | Meaning |
|---|---|
| **Pass** | The requirement is met. No action needed. |
| **Warning** | The PC will probably work, but something is not ideal and may cause problems. |
| **Fail** | A requirement is not met. The product is unlikely to work until this is resolved. |
| **Info** | Background information, not a pass or fail. |
<!-- docshot: check-warning-example crop=.result-row.warning -->
![](../_images/symmetron-check-warning-example.png)

## Re-run the checks

After you change something on the PC — for example after plugging in a device, installing a driver or freeing up memory — you can run the checks again.

- Click **Change** in the summary bar to pick a different product, or
- Click **Re-run** to run the same product's checks again.
<!-- docshot: check-profile-actions crop=.product-summary-bar -->
![](../_images/symmetron-check-profile-actions.png)

## Send the results to Rhopoint

If a check fails and you would like help, click **Send to Rhopoint** below the results to forward the check report to Rhopoint Support. See [Sending Diagnostics to Rhopoint](rhopoint-symmetron-sending-diagnostics-to-rhopoint.md) for details.

> [!info] If you see the message *"No checks matched this profile on the current platform"*, the selected product is not supported on this PC's operating system.