# Batching Results

> [!note] Esta página aún no está traducida y se muestra en inglés.


## Working with batches in Appearance Elements

Batches in Appearance Elements are used to group related measurements so that data can be analysed, compared and reported more effectively. Batches appear as **tabs (1)** at the top of the data table, and the batch name is also shown in the **Batch column (2)** for each measurement row.  
![image description](../_images/1770131637884-20260203-151324-screenshot-ae.png)

### Creating and naming batches  
- Click the **+(3)** button above the data table to open a new batch tab, then enter a name for this batch.  
- Alternatively, type a new batch name directly into the **Batch** column for any measurement; this automatically creates the batch and assigns that measurement to it.  

### Adding measurements to a batch  
- When you take a new measurement while a specific batch tab is active, that measurement is automatically added to the currently selected batch.  
- You can also drag and drop existing measurements from the table onto a batch tab to move or copy them into that batch.  

### Creating a batch from selected measurements  
- To build a batch from existing data, select the desired measurements using the **selection box (1)** in the table.  
- Right‑click on the selection and choose **Create batch**; a new batch is created and all selected measurements are assigned to it.
![image description](../_images/1770131846917-20260203-151655-screenshot-ae.png)