# Non-Contact Small Area Gloss Adaptor (2mm)

> [!note] Tato stránka ještě není přeložena do češtiny a zobrazuje se anglicky.


### Non-Contact Measurement

The Non-Contact Small Area Gloss Adaptor (2mm) is designed to allow non-contact measurement when using the Aesthetix with a Lab Stand, Co-Bot or mounted on a custom designed frame/jig. The adaptor must be used with a gap of 2mm between the bottom face and the sample to be measured.  
​

This adaptor incorporates the small‑area gloss aperture, enabling accurate measurements on localised features and curved parts.

**Part Number- B8000-034**
![B8000-034](../_images/1770811750745-B8000-034.png)