Home / FAQs / Haze FAQs / How is haze measured?

How can I measure haze?

Reflection haze meters are traditionally used to measure reflection haze and use a standard glossmeter design with additional detectors 2º either side of the specular angle to measure the haze component.

As the Rhopoint IQ incorporates an LDA, a 512 element, linear, photo-diode array (LDA) at the 20° angle instead of a single detector enabling measurement of the distribution of reflected light. haze measurement is easily accomplished using the reflected light data 2º either side of the specular angle. The instrument can display the natural haze value (HU) or LogHaze value (HULOG).

Haze compensation is also required to correct variations when measuring different surface colours.

As reflection haze is caused by micro texture on a surface a small amount of light is reflected adjacent to the gloss angle. White surfaces, bright colours and metallics also produce a certain amount of diffuse light, reflected from within the material, to be present in this region. This diffuse light exaggerates the haze signal causing a higher than expected reading.

haze compensation

An advantage of the IQ is that unlike a conventional instrument, compensation is calculated using a region adjacent to the haze angle. This techniques gives compatible readings on solid colours but also compensates for directional reflection from metallic coatings and speciality pigments.


Contact us to find out more about our range of gloss and appearance measurement instruments.

  • +44 (0)1424 739622

  • sales@rhopointinstruments.com